A 79 × 36 × 24 inch road case designed in SolidWorks to move an entire team's gear and keep it usable while packed.
450 lb
Loaded weight
3
Separate power circuits
Fig. 1 Road case CAD, showing the internal compartments and cable routing.
The case carries 16 laptops, four mobile hotspots, two power banks, a
3D printer and a full sound system, all charging and usable without
unpacking. The electrical planning was the real constraint: each power
bank draws over 15 A, so everything could not share one outlet, and the
case runs three separate circuits to keep within what a venue will
actually give you.
